Saab 9-4x lug nut torque
GarageDex's lug nut torque data shows the 2011 Saab 9-4x wheel lug nuts torque to 110 ft-lbs. They are 14mm x 1.50 lug nuts.
Shop torque wrenches A 1/2-inch click wrench covers every value on this page
Key takeaways
- Torque: 110 ft-lbs for the 2011 model years.
- Tighten in a star (criss-cross) pattern so the wheel seats flat.
- Re-check torque after 50 to 100 miles.
- Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
| Years | Torque | Pattern |
|---|---|---|
| 2011 | 110 ft-lbs | Star pattern |
| Years | Thread size |
|---|---|
| 2011 to 2018 | 14mm x 1.50 |
Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.
Tools for the job
These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Saab 9-4x.
Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Saab 9-4xShop lug nuts Wheel locks14mm x 1.50 anti-theft nut setShop wheel locks Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
How to torque Saab 9-4x wheels
- Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
- Lower the car until the tire just touches and cannot spin.
- Set the wrench to 110 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
- Lower fully, go around once more at the same setting.
- Re-check after 50 to 100 miles.
Other Saab models
Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.