Toyota Tundra with Steel Wheels lug nut torque
GarageDex's lug nut torque data shows the 2007 to 2021 Toyota Tundra with Steel Wheels wheel lug nuts torque to 154 ft-lbs. They are 14mm x 1.50 lug nuts.
Key takeaways
- Torque: 154 ft-lbs for the 2007 to 2021 model years.
- Tighten in a star (criss-cross) pattern so the wheel seats flat.
- Re-check torque after 50 to 100 miles.
- Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
| Years | Torque | Pattern |
|---|---|---|
| 2007 to 2021 | 154 ft-lbs | Star pattern |
| Years | Thread size |
|---|---|
| 2007 to 2020 | 14mm x 1.50 |
Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.
Tools for the job
These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Toyota Tundra with Steel Wheels.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
How to torque Toyota Tundra with Steel Wheels wheels
- Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
- Lower the car until the tire just touches and cannot spin.
- Set the wrench to 154 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
- Lower fully, go around once more at the same setting.
- Re-check after 50 to 100 miles.
Other Toyota models
Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.