Ducati 1158 Multistrada V4 Chain Size and Sprocket Teeth
GarageDex's manufacturer-catalogue data shows the 2025 Ducati 1158 Multistrada V4 uses a 525 chain with 16-tooth front and 42-tooth rear sprockets from the factory. (124 links) Chain and sprocket sizing varies by year - see the table for each range.
Chain and sprocket fitment by year
| Years | Chain | Links | Front teeth | Rear teeth |
|---|---|---|---|---|
| 2025 | 525 | 124 | 16 | 42 |
| 2021-2024 | 525 | 124 | 16 (JTF749RB) | 42 (JTR765ZBK) |
Part numbers in parentheses are the manufacturer's stock-gearing sprocket codes, useful for matching a replacement.
Chain and sprockets for the Ducati 1158 Multistrada V4
Match the pitch (525) and tooth counts in the table - chain and sprockets are a matched set, and a mismatched pitch will not fit the sprockets at all.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Frequently asked
What chain size does a Ducati 1158 Multistrada V4 use?
GarageDex's manufacturer-catalogue data shows the 2025 Ducati 1158 Multistrada V4 uses a 525 chain with 16-tooth front and 42-tooth rear sprockets from the factory. (124 links) Chain and sprocket sizing varies by year - see the table for each range.
What is the stock gearing on a Ducati 1158 Multistrada V4?
16-tooth front and 42-tooth rear from the factory.
What changes if I go +2 teeth on the rear sprocket?
Going up 2 teeth on the rear sprocket (or down 1-2 on the front) lowers the gearing: quicker acceleration off the line, but a lower top speed, and the chain usually needs to be 1-2 links longer to keep enough wrap on the front sprocket - a shop or the sprocket's fitment chart will confirm the exact link count for that combination. This is a generic mechanical rule, not a claim about this specific model's aftermarket options.
How many links does a Ducati 1158 Multistrada V4 chain have?
124 links at stock length and gearing, per the manufacturer catalogue.
Other Ducati models
Source: JT Sprockets - Online Catalogue, a chain and sprocket manufacturer's own application catalogue. Chain and sprocket sizing is factory-stock as JT publishes it - aftermarket gearing changes (see the FAQ) are not reflected here.