Ducati 1158 Multistrada V4S Chain Size and Sprocket Teeth

GarageDex's manufacturer-catalogue data shows the 2021-2024 Ducati 1158 Multistrada V4S uses a 525 chain with 16-tooth front and 42-tooth rear sprockets from the factory. (124 links)

Chain and sprocket fitment by year

YearsChainLinksFront teethRear teeth
2021-202452512416 (JTF749RB)42 (JTR765ZBK)

Part numbers in parentheses are the manufacturer's stock-gearing sprocket codes, useful for matching a replacement.

Verified fitment
Sourced from a chain and sprocket manufacturer's own application catalogue. Reviewed by the GarageDex editorial team - how we verify →

Chain and sprockets for the Ducati 1158 Multistrada V4S

Match the pitch (525) and tooth counts in the table - chain and sprockets are a matched set, and a mismatched pitch will not fit the sprockets at all.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Frequently asked

What chain size does a Ducati 1158 Multistrada V4S use?

GarageDex's manufacturer-catalogue data shows the 2021-2024 Ducati 1158 Multistrada V4S uses a 525 chain with 16-tooth front and 42-tooth rear sprockets from the factory. (124 links)

What is the stock gearing on a Ducati 1158 Multistrada V4S?

16-tooth front and 42-tooth rear from the factory, part numbers front JTF749RB, rear JTR765ZBK.

What changes if I go +2 teeth on the rear sprocket?

Going up 2 teeth on the rear sprocket (or down 1-2 on the front) lowers the gearing: quicker acceleration off the line, but a lower top speed, and the chain usually needs to be 1-2 links longer to keep enough wrap on the front sprocket - a shop or the sprocket's fitment chart will confirm the exact link count for that combination. This is a generic mechanical rule, not a claim about this specific model's aftermarket options.

How many links does a Ducati 1158 Multistrada V4S chain have?

124 links at stock length and gearing, per the manufacturer catalogue.

Other Ducati models

Source: JT Sprockets - Online Catalogue, a chain and sprocket manufacturer's own application catalogue. Chain and sprocket sizing is factory-stock as JT publishes it - aftermarket gearing changes (see the FAQ) are not reflected here.