Honda CB650 F / FA - E,F,G,H,J Chain Size and Sprocket Teeth
GarageDex's manufacturer-catalogue data shows the 2014-2018 Honda CB650 F / FA - E,F,G,H,J uses a 525 chain with 15-tooth front and 42-tooth rear sprockets from the factory. (118 links)
Chain and sprocket fitment by year
| Years | Chain | Links | Front teeth | Rear teeth |
|---|---|---|---|---|
| 2014-2018 | 525 | 118 | 15 (JTF1370RB) | 42 (JTR1304) |
Part numbers in parentheses are the manufacturer's stock-gearing sprocket codes, useful for matching a replacement.
Chain and sprockets for the Honda CB650 F / FA - E,F,G,H,J
Match the pitch (525) and tooth counts in the table - chain and sprockets are a matched set, and a mismatched pitch will not fit the sprockets at all.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Frequently asked
What chain size does a Honda CB650 F / FA - E,F,G,H,J use?
GarageDex's manufacturer-catalogue data shows the 2014-2018 Honda CB650 F / FA - E,F,G,H,J uses a 525 chain with 15-tooth front and 42-tooth rear sprockets from the factory. (118 links)
What is the stock gearing on a Honda CB650 F / FA - E,F,G,H,J?
15-tooth front and 42-tooth rear from the factory, part numbers front JTF1370RB, rear JTR1304.
What changes if I go +2 teeth on the rear sprocket?
Going up 2 teeth on the rear sprocket (or down 1-2 on the front) lowers the gearing: quicker acceleration off the line, but a lower top speed, and the chain usually needs to be 1-2 links longer to keep enough wrap on the front sprocket - a shop or the sprocket's fitment chart will confirm the exact link count for that combination. This is a generic mechanical rule, not a claim about this specific model's aftermarket options.
How many links does a Honda CB650 F / FA - E,F,G,H,J chain have?
118 links at stock length and gearing, per the manufacturer catalogue.
Same bike, other specs: Honda CB650F, FA battery size.
Other Honda models
Source: JT Sprockets - Online Catalogue, a chain and sprocket manufacturer's own application catalogue. Chain and sprocket sizing is factory-stock as JT publishes it - aftermarket gearing changes (see the FAQ) are not reflected here.