Suzuki GSX-S750 ZA M0 Chain Size and Sprocket Teeth

GarageDex's manufacturer-catalogue data shows the 2020 Suzuki GSX-S750 ZA M0 uses a 525 chain with 17-tooth front and 43-tooth rear sprockets from the factory. (114 links)

Chain and sprocket fitment by year

YearsChainLinksFront teethRear teeth
202052511417 (JTF520RB)43 (JTR1876)

Part numbers in parentheses are the manufacturer's stock-gearing sprocket codes, useful for matching a replacement.

Verified fitment
Sourced from a chain and sprocket manufacturer's own application catalogue. Reviewed by the GarageDex editorial team - how we verify →

Chain and sprockets for the Suzuki GSX-S750 ZA M0

Match the pitch (525) and tooth counts in the table - chain and sprockets are a matched set, and a mismatched pitch will not fit the sprockets at all.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Frequently asked

What chain size does a Suzuki GSX-S750 ZA M0 use?

GarageDex's manufacturer-catalogue data shows the 2020 Suzuki GSX-S750 ZA M0 uses a 525 chain with 17-tooth front and 43-tooth rear sprockets from the factory. (114 links)

What is the stock gearing on a Suzuki GSX-S750 ZA M0?

17-tooth front and 43-tooth rear from the factory, part numbers front JTF520RB, rear JTR1876.

What changes if I go +2 teeth on the rear sprocket?

Going up 2 teeth on the rear sprocket (or down 1-2 on the front) lowers the gearing: quicker acceleration off the line, but a lower top speed, and the chain usually needs to be 1-2 links longer to keep enough wrap on the front sprocket - a shop or the sprocket's fitment chart will confirm the exact link count for that combination. This is a generic mechanical rule, not a claim about this specific model's aftermarket options.

How many links does a Suzuki GSX-S750 ZA M0 chain have?

114 links at stock length and gearing, per the manufacturer catalogue.

Same bike, other specs: Suzuki GSX-S750 battery size.

Other Suzuki models

Source: JT Sprockets - Online Catalogue, a chain and sprocket manufacturer's own application catalogue. Chain and sprocket sizing is factory-stock as JT publishes it - aftermarket gearing changes (see the FAQ) are not reflected here.