Ducati 996 SPS Spark Plug
GarageDex's powersports data shows the Ducati 996 SPS uses a DCPR8E spark plug, gapped to 0.032".
Spark plug fitment by year
| Years | Standard plug | Iridium upgrade | Gap |
|---|---|---|---|
| 2010 | DCPR8E | - | 0.032" |
996cc motorcycle. Match the exact part code, thread reach, and heat range. The iridium column is the same-fit upgrade for a longer service life.
Spark plugs for your Ducati 996 SPS
The recommended plug is a DCPR8E. Match that code - spark plugs are thread-, reach-, and heat-range-specific, so the part number matters more than the brand. Gap it to spec before it goes in and you're done.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Frequently asked
What spark plug does a Ducati 996 SPS take?
GarageDex's powersports data shows the Ducati 996 SPS uses a DCPR8E spark plug, gapped to 0.032".
What is the spark plug gap on a Ducati 996 SPS?
The Ducati 996 SPS spark plug gap is 0.032". Set the gap with a feeler gauge before install - iridium plugs come pre-gapped but always verify, since a wrong gap causes misfires and hard starts.
How often should I change the spark plugs on a motorcycle?
Standard plugs typically want replacing every 8,000-12,000 miles (or per your service manual); iridium plugs go much longer. Fouled or worn plugs cause hard starts, misfires, and poor fuel economy - a cheap part that punches above its weight.