Husqvarna 510 TE Spark Plug
GarageDex's powersports data shows the Husqvarna 510 TE uses a CR7E spark plug, gapped to 0.020". Spark plug fitment varies by year - see the table for each range.
Spark plug fitment by year
| Years | Standard plug | Iridium upgrade | Gap |
|---|---|---|---|
| 2004 | CR7E | - | 0.020" |
| 1991-1997 | CR7E | - | 0.020" |
510cc motorcycle. Match the exact part code, thread reach, and heat range. The iridium column is the same-fit upgrade for a longer service life.
Spark plugs for your Husqvarna 510 TE
The recommended plug is a CR7E. Match that code - spark plugs are thread-, reach-, and heat-range-specific, so the part number matters more than the brand. Gap it to spec before it goes in and you're done.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Frequently asked
What spark plug does a Husqvarna 510 TE take?
GarageDex's powersports data shows the Husqvarna 510 TE uses a CR7E spark plug, gapped to 0.020". Spark plug fitment varies by year - see the table for each range.
What is the spark plug gap on a Husqvarna 510 TE?
The Husqvarna 510 TE spark plug gap is 0.020". Set the gap with a feeler gauge before install - iridium plugs come pre-gapped but always verify, since a wrong gap causes misfires and hard starts.
Does the Husqvarna 510 TE spark plug change by year?
Yes - the fitment differs across the years we cover: 2004 uses CR7E; 1991-1997 uses CR7E. Match your exact year in the table.
How often should I change the spark plugs on a motorcycle?
Standard plugs typically want replacing every 8,000-12,000 miles (or per your service manual); iridium plugs go much longer. Fouled or worn plugs cause hard starts, misfires, and poor fuel economy - a cheap part that punches above its weight.