2013 Mazda Mazda3 Oil Type & Capacity
The 2013 Mazda Mazda3 uses 5W-30 or 0W-20 oil, with a capacity of about 4-6 quarts depending on the engine.
Key takeaways
- Oil: 5W-30/0W-20, about 6 quarts with a filter change.
- Grade and capacity vary by engine - match your exact engine.
- Change the oil filter every time you change the oil.
| Engine | Viscosity | Capacity |
|---|---|---|
| 3 1.6 CiTD DPF | 5W-30 | 4 qt / 3.8 L |
| 3 1.6 | 5W-30 | 4.1 qt / 3.9 L |
| 3 2.0 | 0W-20 | 4.5 qt / 4.3 L |
| 3 2.0 (MEX) | 5W-30 | 4.5 qt / 4.3 L |
| 3 2.2 CiTD DPF | 5W-30 | 5 qt / 4.7 L |
| 3 2.3 MPS | 5W-30 | 6 qt / 5.7 L |
Capacities are with an oil-filter change. Confirm on the dipstick after refilling.
Oil & filter for the 2013 Mazda Mazda3
You need 5W-30 oil (6 quarts with a filter change). Buy the oil and a filter together; a DIY oil change takes about 30 minutes, or any shop can do it.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Shop 5W-30 oil + filterFrequently asked
How much oil does a 2013 Mazda Mazda3 take?
It depends on the engine: 3 1.6 CiTD DPF takes 4 qt; 3 1.6 takes 4.1 qt; 3 2.0 takes 4.5 qt; 3 2.0 (MEX) takes 4.5 qt; 3 2.2 CiTD DPF takes 5 qt; 3 2.3 MPS takes 6 qt.
What kind of oil does a 2013 Mazda Mazda3 use?
5W-30 or 0W-20 full-synthetic motor oil.
Can I use a thicker oil instead of 5W-30?
Stick with 5W-30. Modern engines spec a low-viscosity oil for fuel economy and tight clearances; a thicker grade can reduce mpg and may affect your warranty.
See where this sits in our study of the most common engine oil viscosities in the US.