2013 Mazda Mazda6 Oil Type & Capacity
The 2013 Mazda Mazda6 uses 0W-20 or 5W-30 oil, with a capacity of about 4.3-5.3 quarts depending on the engine.
Key takeaways
- Oil: 0W-20/5W-30, about 5.3 quarts with a filter change.
- Grade and capacity vary by engine - match your exact engine.
- Change the oil filter every time you change the oil.
| Engine | Viscosity | Capacity |
|---|---|---|
| 6 1.8 | 0W-20 | 4.5 qt / 4.3 L |
| 6 1.8 | 5W-30 | 4.5 qt / 4.3 L |
| 6 2.0 CiTD | 5W-30 | 4.3 qt / 4.1 L |
| 6 2.2 CiTD | 5W-30 | 5 qt / 4.7 L |
| 6 2.5 | 0W-20 | 5.3 qt / 5 L |
| 6 2.5 (MEX) | 5W-30 | 5.3 qt / 5 L |
Capacities are with an oil-filter change. Confirm on the dipstick after refilling.
Oil & filter for the 2013 Mazda Mazda6
You need 0W-20 oil (5.3 quarts with a filter change). Buy the oil and a filter together; a DIY oil change takes about 30 minutes, or any shop can do it.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Shop 0W-20 oil + filterFrequently asked
How much oil does a 2013 Mazda Mazda6 take?
It depends on the engine: 6 1.8 takes 4.5 qt; 6 1.8 takes 4.5 qt; 6 2.0 CiTD takes 4.3 qt; 6 2.2 CiTD takes 5 qt; 6 2.5 takes 5.3 qt; 6 2.5 (MEX) takes 5.3 qt.
What kind of oil does a 2013 Mazda Mazda6 use?
0W-20 or 5W-30 full-synthetic motor oil.
Can I use a thicker oil instead of 0W-20?
Stick with 0W-20. Modern engines spec a low-viscosity oil for fuel economy and tight clearances; a thicker grade can reduce mpg and may affect your warranty.
See where this sits in our study of the most common engine oil viscosities in the US.