Jeep oil life light reset
To reset the oil life light on a Jeep (Uconnect touchscreen models): With the ignition on, open the Uconnect Vehicle Info screen. Navigate to the Oil Life submenu. Select Reset and confirm the prompt to set the oil life back to 100%.
Key takeaways
- Change the oil first - the light is only a reminder.
- 2 procedures listed for Jeep, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
Uconnect touchscreen models
- With the ignition on, open the Uconnect Vehicle Info screen.
- Navigate to the Oil Life submenu.
- Select Reset and confirm the prompt to set the oil life back to 100%.
Source: Dunn Ram Trucks - The oil change indicator on a Ram or Jeep - independent references, not the manufacturer.
Non-touchscreen models with steering-wheel arrow buttons
- Turn the ignition to ON/RUN without starting the engine.
- Use the steering-wheel down arrow to reach Vehicle Info, then the right arrow to reach Oil Life.
- Press and hold OK/right-arrow until the oil life percentage resets to 100%.
Source: Fury Stillwater CDJR - How to reset the oil light on Dodge vehicles (shared Stellantis cluster) - independent references, not the manufacturer.
Tools that help
These fit any car. A scanner with service-reset functions handles the makes that have no button procedure.
OBD-II scannerResets service lights on cars with no manual procedureShop Reminder stickersWrite the next due mileage so the light is a backup, not the planShop stickers
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Jeep tire pressure light reset →