Jeep tire pressure light reset
To reset the tire pressure light on a Jeep (Most models): Inflate all tires to the recommended PSI on the door-jamb sticker. Drive the Jeep for 10-20 minutes at a sustained speed above about 15 mph so the system relearns automatically. If the light persists, use the Uconnect Vehicle Info/Tire Pressure screen or the physical TPMS reset button (if equipped) to force a reset.
Key takeaways
- Inflate every tire to the door-jamb pressure first - the light is telling you something.
- 1 procedure listed for Jeep, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
Most models
Dashboard menu
- Inflate all tires to the recommended PSI on the door-jamb sticker.
- Drive the Jeep for 10-20 minutes at a sustained speed above about 15 mph so the system relearns automatically.
- If the light persists, use the Uconnect Vehicle Info/Tire Pressure screen or the physical TPMS reset button (if equipped) to force a reset.
Sources: Firkins - How to reset the tire pressure light in your Jeep, Ram-TRX.com - Reset TPMS sensor - independent references, not the manufacturer.
Tools that help
These fit any car. A gauge that reads to 0.5 psi takes the guesswork out of the relearn.
Digital tire gaugeSet every tire to the door-jamb pressure before any resetShop Tire inflatorSets an exact pressure from the car's 12V socketShop inflators
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.