GarageDex

Bentley Continental GT lug nut torque

GarageDex's lug nut torque data shows the 2020 to 2021 Bentley Continental GT wheel lug nuts torque to 133 ft-lbs, then re-torque to 122 ft-lbs in a star pattern. Across the Bentley lineup, that guide lists 14mm x 1.50 wheel bolts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 133 ft-lbs, then re-torque to 122 ft-lbs in a star pattern for the 2020 to 2021 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Bentley Continental GT lug nut torque by year
YearsTorquePattern
2020 to 2021133/122 ft-lbsStar pattern, two stages
Bentley Continental GT lug nut thread size
YearsThread size
2004 to 201914mm x 1.50 bolt

The guide below does not break out the Bentley Continental GT separately - this is the general Bentley thread size, same source.

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Bentley Continental GT.

Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Bentley Continental GTShop lug nuts Wheel locks14mm x 1.50 anti-theft bolt setShop wheel locks Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Bentley Continental GT wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 133 ft-lbs, then re-torque to 122 ft-lbs in a star pattern and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Bentley models

ArnageArnage RLAzureAzure Le MansBentaygaBrooklandsContinental All Models Except:Continental GT/GTCContinental R Le Mans/T Le MansContinental Flying SpurContinental SupersportsEight/Turbo RFlying SpurMulsanne

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.