Do I need a torque wrench for Dodge Ram 3500 wheels?

Yes. An impact gun over-tightens unevenly, which can warp rotors and stretch studs. Snug the nuts in a star pattern, then finish each one with a torque wrench set to the value above.

Should I re-torque the lug nuts after driving?

Yes. Re-check after the first 50 to 100 miles. The wheel seats against the hub as it heats and cools, and nuts that were correct in the driveway can read low a week later.

Dodge Ram 3500 lug nut torque

GarageDex's lug nut torque data shows the 2003 to 2010 Dodge Ram 3500 wheel lug nuts torque to 135 ft-lbs.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

Torque: 135 ft-lbs for the 2003 to 2010 model years.
Tighten in a star (criss-cross) pattern so the wheel seats flat.
Re-check torque after 50 to 100 miles.
Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.

Dodge Ram 3500 lug nut torque by year
Years	Torque	Pattern
2003 to 2010	135 ft-lbs	Star pattern
1995 to 2001	130-160 ft-lbs	Star pattern

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Dodge Ram 3500.

Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Dodge Ram 3500Shop lug nuts Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Dodge Ram 3500 wheels

Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
Lower the car until the tire just touches and cannot spin.
Set the wrench to 135 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
Lower fully, go around once more at the same setting.
Re-check after 50 to 100 miles.

Other Dodge models

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.